STRING POTS BY SERIES / SPS-PT
Heavy-Duty Industrial Cable & Rope Potentiometers
Long-stroke cable potentiometers for industrial displacement measurement. Select the electrical interface and mechanical working travel separately, then confirm environmental limits against the application.
10″–200″ (254–5,080 mm)
Configure SPS-PT / Request STEP →Stroke selection
Nominal inch selections with calculated metric equivalents. Confirm the supplied unit’s electrical and mechanical travel.
Electrical interface
500Ω / 1kΩ / 5kΩ / 10kΩ; conditioned 0–10V or 4–20mA by configuration
Application focus
Hydraulic presses, lifting platforms, gates and industrial test stands
BEFORE THE DRAWING IS RELEASED
Three checks for your configuration
- Working stroke versus mechanical reserve and permitted overtravel
- Housing, cable material, ingress requirement and operating temperature
- Loop supply, load resistance or voltage-output loading
Original model review: Celesco PT1A / PT5A / PT8000 / PT9101, UniMeasure P510 / HX. Comparison candidates require mechanical and electrical verification; no universal drop-in equivalence is implied.
THREE WIRES. ONE POSITION SIGNAL.
Passive voltage-divider wiring reference
A passive string potentiometer uses three electrical connections. The wiper voltage follows string travel as a proportion of the excitation voltage.
Ideal relation: Vout ≈ Vexc × x / L. At 50% travel and 5V excitation, an ideal zero-offset output is 2.5V.
Illustrative colors only. Confirm the exact model pinout, maximum excitation and power rating. Do not apply 24V unless the specified unit permits it. Conditioned voltage and two-wire current-loop models need their own wiring diagram.
SPECIFY YOUR MEASUREMENT
Request a quote & configuration drawing
Tell us the stroke, signal and installation. We will review the configuration, availability and STEP request together.
Explore the other string pot series
Compact string pots
2″–50″ (50.8–1,270 mm)
Suspension travel, pedal movement and hydraulic test rigs
Explore configuration →Subminiature wire pots
1.5″–10″ (38.1–254 mm)
Structural deflection fixtures, crash-test development and compact robotics
Explore configuration →Industrial cable potentiometers
10″–200″ (254–5,080 mm)
Hydraulic presses, lifting platforms, gates and industrial test stands
Explore configuration →Motorsport string pots
5″–50″ (127–1,270 mm)
Baja / off-road suspension development and wet test fixtures
Explore configuration →Digital readout kits
1.5″–200″ (38.1–5,080 mm)
Laboratory benches, hydraulic fixtures and code-free position readout
Explore configuration →